Traps & MIBs
C-11
6371-A2-GB20-10
August 2000
Paradyne Enterprise MIBs
The following Paradyne Enterprise MIB Objects are supported by the unit:
H
Device Control MIB
(pdn_Control.mib)
H
Device Diagnostics MIB
(pdn_diag.mib)
H
Health and Status MIB
(pdn_HealthAndStatus.mib)
H
Configuration MIB
(pdn_Config.mib)
H
Interface Configuration MIB
(pdn_inet.mib)
H
ARP MIB
(pdn_Arp.mib)
H
NAT MIB
(pdn_NAT.mib)
H
DHCP MIB
(pdn_dhcp.mib)
H
DSL Endpoint MIB
(DslEndpoint.mib )
H
SYSLOG MIB
(pdn_syslog.mib)
H
Interface Configuration MIB
(pdn_IfExtConfig.mib)
Device Control MIB
Objects supported by the Device Control MIB, pdn-Control.mib, include the
Device Control Group (fully supported) and the Device Control Download group.
Table C-7. Device Control Table Objects
Object
Description Setting/Contents
devHWControl Reset
(
control 1)
Initiates a hardware
power-on reset.
Value from this object:
H noOp(1)
H Reset(2) – Resets the DSL router with no
warning.
devControlDownLoadIndex
(devControlDownloadEntry 1)
Represents the firmware
bank.
H bank (1)
H bank (2)
devControlDownLoadRelease
(devControlDownLoadEntry 2)
Indicates the software
release for the bank.
Numeric.
devControlDownLoadOperStatus
(devControlDownLoadEntry 3)
Indicates whether the
downloaded entry contains
a valid or invalid software
release.
H (1) – Valid software release.
H (2) – Invalid software release. Displays if
devControlDownLoadRelease is blank.
devControlDownLoadAdminStatus
(devControlDownLoadEntry 4)
Indicates whether the
downloaded entry is active
or inactive.
H Active(1)
H Inactive(2)
Supported as read-only.
