Command Line Interface
A-2
6371-A2-GB20-10August 2000
Navigation
The Hotwire DSL router uses the following keys (as do most terminal emulation
programs):
H Enter or Return – Accepts the input.
H Ctrl-c – Aborts the entry or clears the input line.
H Down Arrow – Repeats an entry within the last five entered.
H Up Arrow – Displays the last entry.
H Left Arrow – Moves the insertion point one space to the left.
H Right Arrow – Moves the insertion point one space to the right.
Command Recall
The Hotwire DSL router keeps a history of the last several commands entered on
the command line interface. For example, if you press the Up Arrow key, the most
recently entered command will appear on the command line, where it can be
edited and reentered by pressing Enter. If you press the Up Arrow key again, the
next most recent command will appear, etc.
After pressing the Up Arrow key one or more times, pressing the Down Arrow key
moves down the list of recent commands, wrapping past the end of the list in
either direction.
Commands appearing in the command line can be edited. Use the Left and Right
Arrow keys to move the insertion point, enter the new characters or use the
Delete key to delete the character just to the left of the insertion point.
Document Conventions
This syntax is used throughout this manual. The Command Line Interface is not
case-sensitive, with the exception of the Login ID and Password fields.
Syntax Translation
[ ]
Square brackets represent an optional element.
{ }
Braces represent a required entry.
|
Vertical bar separates mutually exclusive elements.
Italics
Entry is a variable to be supplied by the operator.
Bold
Enter (type) as shown.
x.x.x.x
32-bit IP address and mask information where
x
is an
8-bit weighted decimal notation.
xx:xx:xx:xx:xx:xx
MAC address information where
x
is a hexadecimal
notation.
