A SERVICE OF

logo

Open as PDF
next previous
38
Chapter4SelfCalibration
4-4. Setting the calibration targets
In CAL mode, white point, color gamut and gamma can be set as adjustment targets.
Attention
• Adjustment targets will be applied only to the currently displayed CAL mode.
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Target” from “Color”, and press
.
The target setting window appears.
3. Choose “Brightness”, and press .
4. Set the target brightness with
or , and press .
5. Choose “White Point”, and press
.
The white point setting window appears.
- When setting color coordinates, select “White(x)” and “White(y)” and press . Then set the
respective values. Set within 0.2400 to 0.4500.
- When specifying color temperature, select “Temperature” and press .
Settings Function
4000Kto10000K Specifycolortemperatureinunitsof100K.
Adobe
®
RGB ChangetocolortemperatureinconformancewithAdobe
®
RGB.
sRGB ChangetocolortemperatureinconformancewithsRGB.
EBU ChangetocolortemperatureinconformancewithEBU.
REC709 ChangetocolortemperatureinconformancewithREC709.
REC1886 ChangetocolortemperatureinconformancewithREC1886.
SMPTE-C ChangetocolortemperatureinconformancewithSMPTE-C.
DCI ChangetocolortemperatureinconformancewithDCI.
Note
• When color coordinates are changed, the color temperature is changed to “User”.
Press
to exit.
6. Choose “Color Gamut”, and press .
The color gamut setting window appears. The color gamut dened by each standard can be selected.
Settings Function
Native Displayimagesinthemonitor’soriginalcolorgamut.
Adobe
®
RGB DisplayimagesinthecolorgamutdenedbyAdobe
®
RGB.
sRGB DisplayimagesinthecolorgamutdenedbysRGB.
EBU DisplayimagesinthecolorgamutdenedbyEBU.
REC709 DisplayimagesinthecolorgamutdenedbyREC709.
REC1886 DisplayimagesinthecolorgamutdenedbyREC1886.
SMPTE-C DisplayimagesinthecolorgamutdenedbySMPTE-C.
DCI DisplayimagesinthecolorgamutdenedbyDCI.
Note
• To set a color gamut other than those specied by each standard, specify the color coordinates of each RGB color at
“Gamut Settings”. The “Color Gamut” setting will automatically change to “User” at this time.
• Clipping can be set at “Gamut Settings”. For details on clipping, see (“To set clipping” (page 25)).