29
Chapter2AdjustingScreens
●
To select the range of signals to extend
The method for extending signals can be selected by turning the “Super white” setting “On” or “Off”.
Settings Function
On Theoutputrangeofthesignalisextendedfrom16-254to0-255fordisplay.
Off Theoutputrangeofthesignalisextendedfrom16-235to0-255fordisplay.
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “Range Extension” from “Screen”, and press
.
3. Choose “Super White” from “Range Extension”, and press
.
4. Select “On” or “Off” with
or .
5. Press
to exit.
.Attention
• If “Range Extension” is turned “Off”, the setting can be changed but the change will not be applied.
2-7. Setting HDMI
●
To reduce noise
The small noises that occur in dark images are reduced. Use this function to reduce noise and roughness in
images.
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “HDMI Settings” from “Screen”, and press
.
3. Choose “Noise Reduction”, and press
.
4. Select “On” or “Off” with
or .
5. Press
to exit.
Attention
• Using the Noise Reduction function may deteriorate ne images.
• For interlace signals, the setting value can be changed but this function does not work.
●
To select how to display interlace signal
The display method can be selected before the interlace signal is displayed.
To identify video images automatically and converting them to suitable images
Signals of 24 frames or 30 frames per second for images such as movies, computer graphics, and animations
are automatically identied and the most suitable images are displayed.
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “HDMI Settings” from “Screen”, and press
.
3. Choose “Film Detection”, and press
.
4. Select “On” or “Off” with
or .
5. Press
to exit.
Attention
• If distorted images are displayed when “Film Detection” is “On”, set “Film Detection” to “Off”.
