Only insert one CD per magazine
compartment.
X
Insert a disc into the slot with the printed
side upwards.
The DVD changer pulls in the disc and
places it in the selected magazine
compartment. The message Loading
Disc <x> will be displayed.
i
The loading process may take a while,
depending on the type of disc. If you do not
insert a disc, the display will switch back to
the magazine menu after approximately
20 seconds.
The DVD changer plays the disc if
R
it has been inserted correctly
R
it is a permissible disc
Magazine menu, one disc loaded
1
Magazine compartment occupied,
ejecting possible
2
Empty magazine compartment
X
To exit menu: Press the Load 8 button
again.
or
X
Select Back
or
X
Press the k button
Filling Empty Magazine Compartments
X
Press the Load 8 button.
The magazine menu appears. The currently
playing compartment is indicated by a red
number or, if the magazine is empty,
compartment 1 is marked.
X
Select Fill Empty Slots.
The message Please insert disc <x>
will be displayed.
i
Only insert a CD after COMAND has
prompted you to do so with this message.
Only insert one CD per magazine
compartment.
X
Insert a disc into the slot with the printed
side facing upwards.
You see the Please wait... message.
Once the disc is loaded, the DVD changer
switches to the next empty compartment.
You see these messages: Please wait
and then Please insert disc <x>.
X
Repeat the step until all compartments are
loaded.
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
if it is a permissible type.
If loading is not completed, COMAND plays
the first disc inserted.
X
To end loading procedure: Press the Load
8 button again.
or
X
Select Back.
or
X
Press the k button next to the
COMAND controller.
Loading PCMCIA Memory Card
G
Warning
Only load a memory card when the vehicle is
stationary. There is a risk of accident by being
Audio
181
COMAND APS
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 181
Z
