A SERVICE OF

logo

Removal and Installation
8-105
HP DesignJet 5000 and 5500 Series Printers Service Manual
Paper-Axis Motor Assembly
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Right Rear Cover - Refer
to Page 8-16.
2. Remove the Right Hand Cover - Refer
to Page 8-10.
3. Remove the Service Station Assembly
- Refer to Page 8-69.
4. Disconnect the Paper-Axis Motor
Cable at P10 and the Encoder Cable at
P12 from the Main PCA (and NOT
from Motor).
5. Remove the 2 T-20 screws (Type A)
that secure the Helical Gear to the
right-hand side of the Drive Roller.
P10
P12