Service Calibrations
5-28
HP DesignJet 5000 and 5500 Series Printers Service Manual
Calibration Error: 0020
Problem
Description:
Line Sensor error.
Corrective Action: Check the media used for the Calibration is WHITE.
Replace the Lens Cover Assembly Page 9-5.
Calibration Error: 0021
Problem
Description:
Line Sensor error.
Corrective Action: Check the colors in the calibration pattern. If a color is absent the
Printhead has failed for that color:
Replace the Printhead for that color.
Calibration Error: 0022
Problem
Description:
Line Sensor error.
Corrective Action: Try the following:
Replace the Lens Cover Assembly Page 9-5.
Clean the Mark Encoder on the Overdrive Page 9-9.
Replace the Carriage Assembly Page 8-46.
Calibration Error: 0100
Problem
Description:
Printhead error.
Corrective Action: Try the following:
Check the colors in the calibration pattern. If the quality of a
color is not acceptable the Printhead has failed for that color.
Perform Recovery ( Page 6-15) for the Printhead and repeat the
calibration.
If the error persists for that color, replace the Printhead.
Calibration Error: 1001 (User)
Problem
Description:
Line Sensor Error.
Corrective Action: Replace the Carriage Assembly Page 8-46.
