A SERVICE OF

logo

Service Calibrations
5-6
HP DesignJet 5000 and 5500 Series Printers Service Manual
NOTE If the Printer is not used for 3 minutes, the Printer exits out of
the Service Calibrations Menu and you must repeat the above
steps to enter Service Calibrations again.
NOTE In some cases a quick press of a button may not be recognized by
the Printer. When pressing a button, be sure to press it
deliberately and all the way to the bottom of its travel.
NOTE If the Printer hangs up during an operation, switch the Printer
OFF and restart from step 1.