2-53
Printing with EPSON Drivers for Macintosh | 53
2. Choose one of the following Auto Cut settings:
•Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between the images and trims each
print individually. This provides the cleanest edge for borderless
printing.
• Single Cut causes the images to be printed end-to-end and saves
paper. With borderless printing, you may see a sliver of the previous
or next image.
•Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut with
scissors.
See page 38 for instructions on using the button to operate the
cutter. See page 32 for a list of media that do not work with the
built-in cutter.
3. Select either of the following options:
• Print Page Line prints trim lines on the right and bottom edges of
your pages.
• Save Roll Paper saves paper by not feeding the blank portion of
the last page of your document. Available only when you’ve selected
Roll Paper (Banner) as the Paper Source.
Creating a Custom Preset and Printing
Once you’ve made the correct settings for your print job, create a custom
preset. This will save you time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary from the pull-down menu.
2. After verifying that your settings are correct, select
Save As from the
Presets pull-down menu.
Note: These settings
override settings made
through the control panel.
Note: If you check the
settings on each screen
in the pull-down menu,
go through them carefully
from top to bottom.
Avoid cycling through
them repeatedly, or you
may lose your settings.
sp4000Guide.book Page 53 Friday, October 22, 2004 5:06 PM
