A SERVICE OF

logo

4-110
110 | Maintaining and Transporting the Printer
Follow these steps to replace the tank:
1. Make sure the printer is not printing or performing any other operations
(
READY or PAPER OUT should appear on the control panel).
2. If you are using 220 ml ink cartridges, remove the four cartridges from
the right ink compartment, then close the compartment cover.
3. Place your hand under the right ink compartment and gently pull out
the maintenance tank.
4. Place the used tank in the plastic bag included with the new tank.
5. Insert the new tank.
6. If you removed any ink cartridges, replace them after inserting the new
maintenance tank.
Caution: Be careful not
to spill ink from the
maintenance tank when
removing it. Hold it upright
at all times and dispose of
it carefully.
sp4000Guide.book Page 110 Friday, October 22, 2004 5:06 PM