2-52
52 | Printing with EPSON Drivers for Macintosh
• Paper Suction
lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such as CAD drafting
paper or backlight film.
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
• Cut Method decreases the cutting blade pressure for thinner media,
or adjusts the speed for thick media. You may need to experiment to
determine the best setting for your paper.
• Platen Gap lets you fine-tune the setting for various paper
thicknesses.
• Eject Roller Type lets you define the eject roller for printing on
non-EPSON media. You may need to experiment to determine the
best setting for your paper.
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper
print queues, as described on page 44. In addition, you need to check these
settings for various cutting options.
1. Select Roll Paper Option from the pull-down menu shown below.
You see this screen:
Select the Roll Paper
Option page
sp4000Guide.book Page 52 Friday, October 22, 2004 5:06 PM
