A SERVICE OF

logo

Open as PDF
next previous
2-14 Installation and Operation 5707070-A
Advanced Energy
®
4
Plug AC power into the appropriate outlet.
Figure 2-8. Another view of processor board connections
2. If you are using DC/ battery power:
4
If not already connected, supply input power to the electronics enclosure by
routing the power cable through the appropriate opening (see “Bottom view of
the electronics enclosure” on page 4-7).
4
If needed, connect the DC power cable wires to the Internal Battery section
of the processor board using Figure 2-6 and Figure 2-8 as a guide.
4
Use a cable gland and a cable backing nut to securely fasten the input power
cable to the electronics enclosure.