xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
76
create access_profile
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create an Ethernet access profile:
DGS-3627:admin# create access_profile ethernet vlan source_mac 00-00-00-00-00-01
destination_mac 00-00-00-00-00-02 802.1p ethernet_type profile_id 1
Command: create access_profile ethernet vlan source_mac 00-00-00-00-00-
00-00-00-00-00-02 802.1p ethernet_type profile_id 1
Success.
To create an option 2 packet content mask access profile:
DGS-3627:admin# create access_profile packet_content_mask offset_chunk_1 0 0xFFFFFFFF
offset_chunk_2 1 0xFFFFFFFF offset_chunk_3 2 0xFFFFFFFF offset_chunk_4 3 0xFFFFFFFF
profile_id 3
Command: create access_profile packet_content_mask offset_chunk_1 0 0xFFFFFFFF
offset_chunk_2 1 0xFFFFFFFF offset_chunk_3 2 0xFFFFFFFF offset_chunk_4 3 0xFFFFFFFF
profile_id 3
Success.
delete access_profile
Purpose Used to delete access list rules.
Syntax
delete access_profile [profile_id <value 1-14> |all]
Description The delete access_profile command deletes access list rules.
Delete access_profile command can only delete the profile which is created by ACL module.
Parameters
profile_id - Specifies the index of access list profile. The range is depend on project..
all - Specifies the whole access list profile to delete.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete access list rules:
DGS-3627:admin#delete access_profile profile_id 10
Command: delete access_profile profile_id 10
Success.
config access_profile
Purpose Used to configure access list entry.
