xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
526
DGS-3627:admin# debug ospf show summary_list
Command: debug ospf show summary_list
OSPF Summary List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1 IP: 1.1.1.2
LSID: 1.1.1.1 RTID: 1.1.1.1
Circuit: 2.2.2.1
Circuit: 10.1.1.6
debug ospf show detail
Purpose It is used to display LSAs with detail information. This command can be used if the route
calculation is not correct.
Syntax
debug ospf show detail [rt_link | net_link | summary_link | external_link | type7_link]
Description This command is used to display LSAs with detail information.
Parameters
rt_link - Display all Router LSAs with detail information.
net_link - Display all Network LSAs with detail information.
summary_link - Display all Summary LSAs with detail information.
external_link - Display all AS external LSAs with detail information.
type7_link - Display all type-7 LSAs with detail information.
Restrictions Only Administrator level users can issue this command.
Example usage:
To display current OSPF router link LSA detail information:
