xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
522
debug ospf virtual_link
Purpose Used to enable or disable debug information flags about virtual link.
Syntax
debug ospf route virtual_link state [enable | disable]
Description This command is used to enable or disable debug information flags about virtual link.
Parameters
state - The state of the OSPF virtual link debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable all OSPF virtual link debug flags:
DGS-3627:admin# debug ospf virtual_link state enable
Command: debug ospf virtual_link state enable
Success.
debug ospf route state
Purpose Used to enable or disable debug information flags about OSPF route adding, modifying, and
deleting.
Syntax
debug ospf route state [enable | disable]
Description This command is used to enable or disable debug information flags about OSPF route
adding, modifying, and deleting.
Parameters
state - The state of OSPF route debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable all OSPF route calculating debug flags:
DGS-3627:admin# debug ospf route state enable
Command: debug ospf route state enable
Success.
debug ospf timer state
Purpose Used to enable or disable debug information flags for the OSPF timer.
Syntax
debug ospf timer state [enable | disable]
Description This command is used to enable or disable debug information flags for the OSPF timer.
Parameters
state - The state of the OSPF timer debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable the OSPF timer debug flag:
