D-Link Systems DGS-3600 Manual

A SERVICE OF

next previous

xStack

®

DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch

The window shown below is the CPU Interface Filtering Configuration window for the Packet Content Mask.

Figure 6- 28. CPU Interface Filtering Configuration window (Packet Content)

This window will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified. The

following fields are used to configure the Packet Content Mask:

Parameter Description

Profile ID (1-5)

Type in a unique identifier number for this profile set. This value can be set from 1 to 5.

Type

Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask or

IPv6 address. This will change the menu according to the requirements for the type of

profile.

Select Ethernet to instruct the Switch to examine the layer 2 part of each packet

header.

Select IP to instruct the Switch to examine the IP address in each frame's header.

Select Packet Content Mask to specify a mask to hide the content of the packet

header.

Select IPv6 t instruct the Switch to examine the IPv6 address in each frame's header.

331