xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
BGP Neighbor Description Settings
IP Address
Enter the IP address of the BGP speaking neighbor.
Peer Group Name
Enter the name of the BGP peer group.
Action
Toggle between Description and Clear Description. Description associates a description with
a neighbor. By default, the description is not specified. Clear Description removes the
neighbor’s description.
String
Associate a description with a neighbor. By default, the description is not specified.
BGP Neighbor Session Settings
IP Address
Enter the IP address of the BGP speaking neighbor.
Peer Group Name
Enter the name of the BGP peer group.
State
If state is changed from Enabled to Disabled, the session with the neighbor peer will be
terminated.
Activity
Toggle to enable or disable the state for an individual address family. By default, the setting is
enabled for IPv4 address families.
BGP Neighbor Maximum Prefix Settings
IP Address
Enter the IP address of the BGP speaking neighbor.
Peer Group Name
Enter the name of the BGP peer group.
Prefix Max Count (1-
12000)
Enter the maximum number of prefixes allowed from the specified neighbor. The default is
12000.
Prefix Warning
Threshold (1-100)
Enter the percentage the maximum prefix limit on the router starts to generate a warning
message. The range is from 1 to 100. The default is 75.
Prefix Warning Only
Enable or disable prefix warning only. This allows the router to generate a log message when
the maximum prefix limit is exceeded, instead of terminating the peering session.
Click Apply to implement changes made.
279
