Filter
Top Products
8-35
EBU14000
Parking brake adjustment
Parking brake adjustment may be required if
the parking brake does not hold properly. The
cable length
A
should be adjusted to 56–
60 mm (2.20–2.36 in).
1. Locknut 2. Adjusting bolt
A. Cable length
1. Loosen the locknut and the adjusting nut
on the brake cable below the fuel tank.
2. Fully loosen the locknut and the adjusting
bolt at the rear brake caliper.
3. Turn the adjusting nut on the brake cable
in direction
a
to increase the cable
length or in direction
b
to decrease the
cable length.
1. Locknut 2. Adjusting nut
NOTE:
_
If the cable cannot be adjusted to specifica-
tion, consult a Yamaha dealer.
_
4. Tighten the locknut on the brake cable.
U5TG10.book Page 35 Monday, April 7, 2003 8:50 PM