Filter
Top Products
8-6
1. Bolt (× 2)
To install
1. Place the panel in the original position,
and then install the quick fastener and
the bolts.
NOTE:
_
To install the quick fastener, push the center
pin out so that it protrudes from the fastener
head, insert the fastener into the panel, and
then push the protruding pin in until it is flush
with the fastener head.
_
1. Projection (× 5) 2. Slot (× 5)
2. Install the seat.
U5TG10.book Page 6 Monday, April 7, 2003 8:50 PM