Filter
Top Products
8-10
NOTE:
_
Skip steps 7–10 if the oil filter element is not
being replaced.
_
7. Remove the oil filter element cover by re-
moving the bolts, and then remove the oil
filter element.
1. Oil filter element cover 2. Bolt (× 3)
8. Check the O-ring for damage, and re-
place it if necessary.
1. Oil filter element 2. O-ring
9. Install a new oil filter element and the
O-ring.
NOTE:
_
Make sure that the O-ring is properly seated.
_
10. Install the oil filter element cover by in-
stalling the bolts, and then tighten them
to the specified torque.
U5TG10.book Page 10 Monday, April 7, 2003 8:50 PM