Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-15
7
WARNING
EWA10511
Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.
Tire inspection
The tires must be checked before each
ride. If a tire tread depth reaches the
specified limit, if the tire has a nail or
glass fragments in it, or if the sidewall is
cracked, have a Yamaha dealer re-
place the tire immediately.
Tire information
This motorcycle is equipped with spoke
wheels and tube tires.
WARNING
EWA10461
The front and rear tires should be of
the same make and design, other-
wise the handling characteristics of
the vehicle may be different, which
could lead to an accident.
After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha Motor da Amazônia
Ltda.
WARNING
EWA10571
● Have a Yamaha dealer replace
excessively worn tires. Besides
being illegal, operating the mo-
torcycle with excessively worn
tires decreases riding stability
and can lead to loss of control.
● The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.
● It is not recommended to patch
a punctured tube. If unavoid-
able, however, patch the tube
Front:
100 kPa (1.00 kgf/cm², 15 psi)
Rear:
100 kPa (1.00 kgf/cm², 15 psi)
1. Tire sidewall
2. Tire tread depth
3. Tire wear indicator
2
1
3
Minimum tire tread depth (front and
rear):
1.0 mm (0.04 in)
Front tire:
Size:
70/100-19 42M
Manufacturer/model:
IRC/IX05H
Rear tire:
Size:
90/100-16 52M
Manufacturer/model:
IRC/IX05H
U39C12E0.book Page 15 Thursday, June 9, 2011 2:29 PM