Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-11
4
With the engine turned off:
1. Make sure that the engine stop switch is set to “”.
2. Turn the key to “ON”.
3. Shift the transmission into the neutral position.
4. Push the start switch.
Does the engine start?
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
5. Turn the engine off.
6. Shift the transmission into gear.
7. Keep the clutch lever pulled.
8. Push the start switch.
Does the engine start?
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
NOYES
The system is OK. The motorcycle can be ridden.
YES
NO
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
WARNING
U39C12E0.book Page 11 Thursday, June 9, 2011 2:29 PM