Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-4
7
8 * Swingarm pivot bearings
• Check bearing assemblies for looseness.
• Moderately repack with lithium-soap-based grease.
√√
9 Drive chain
• Check chain slack/alignment and condition.
• Adjust and lubricate chain with Yamaha chain and cable
lube thoroughly.
Every ride
10 * Steering bearings
• Check bearing assemblies for looseness.
• Moderately repack with lithium-soap-based grease.
√√
11 * Chassis fasteners
• Check all chassis fitting and fasteners.
• Correct if necessary.
√√√
12 Brake lever pivot shaft • Apply silicone grease lightly. √√
13 Brake pedal pivot shaft • Apply lithium-soap-based grease lightly. √√
14 Clutch lever pivot shaft
• Apply lithium-soap-based grease (all-purpose grease)
lightly.
√√
15 Shift pedal pivot shaft
• Apply lithium-soap-based grease (all-purpose grease)
lightly.
√√
16 Sidestand pivot
• Check operation.
• Apply lithium-soap-based grease lightly.
√√
17 * Front fork
• Check operation and for oil leakage.
• Replace if necessary.
√√
18 *
Shock absorber assem-
bly
• Check operation and for oil leakage.
• Replace if necessary.
√
19 *
Rear suspension link piv-
ots
• Check operation. √√
• Lubricate with lithium-soap-based grease. √
No. ITEM CHECKS AND MAINTENANCE JOBS
INITIAL ODOMETER READINGS
1000 km
(600 mi) or
1 month or
30 hours
3000 km
(1800 mi) or
6 months or
90 hours
5000 km
(3000 mi) or
12 months or
150 hours
U39C12E0.book Page 4 Thursday, June 9, 2011 2:29 PM