Filter
Top Products
Trouble Recovery
77
4. Unscrew the filter cup from the filter hous-
ing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
5. Drain the water in the filter cup by soaking
it up with a rag.
NOTE:
Properly dispose of the rag.
6. Firmly screw the filter cup onto the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when screwing the filter cup onto
the filter housing.
7. Connect the water detection switch cou-
pler securely until a click is heard.
8. Install the top cowling.
9. Start the engine and make sure that the
water separator warning indicator re-
mains off.
NOTE:
Have a Yamaha dealer inspect the outboard
motor after returning to port.
EMU29760
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immediate-
ly.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.
1. Water detection switch coupler
1. Filter cup
2. Water detection switch lead
1. Water detection switch coupler
U69J17E0.book Page 77 Tuesday, March 7, 2006 10:00 AM