Filter
Top Products
Operation
42
To shift from in gear (forward/reverse) to neu-
tral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the remote control lever firmly and
crisply into the neutral position.
EMU31741
Braking
WARNING
EWM01510
● Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the steering wheel or other parts of the
boat. This could increase the risk of se-
rious injury. It could also damage the
shift mechanism.
● Do not shift into reverse while traveling
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. It is stopped by water resis-
tance after the throttle lever is moved back to
idle. The stopping distance varies depending
on gross weight, water surface conditions,
and wind direction.
EMU27820
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU27852
Procedure
1. Turn the main switch to “” (off).
N
ZMU04588
U69J17E0.book Page 42 Tuesday, March 7, 2006 10:00 AM