Filter
Top Products
Basic components
25
EMU26750
Fuel flow meter
The fuel flow meter displays the amount of
fuel flow over a one hour period, at the current
rate of engine operation.
If twin engines are installed on your boat, the
fuel flow meter displays the total fuel flow of
both the port and starboard engines. It also
displays “” (for port and starboard).
Use the “” (set) button to rotate the fuel flow
display in the following order:
● Press the “” (set) button once to display
the fuel flow of the starboard engine. An “”
(for starboard) will also be displayed.
● Press the “” (set) button a second time to
display the fuel flow of the port engine. A “”
(for port) will also be displayed.
● Press the “” (set) button a third time to
return the display to the total fuel flow of
both engines. “” (for port and starboard)
will also be displayed to indicate both the
port and starboard engines.
NOTE:
● The fuel flow meter displays gallons/hour or
liters/hour according to operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the gauge during installation.
● The fuel consumption meter and fuel econ-
omy meter will indicate the same unit of
measurement.
EMU26760
Fuel consumption meter
This gauge displays the total amount of fuel
consumed since the gauge was last reset.
Press the “” (mode) button repeatedly
until the indicator on the face of the gauge
points to total “” (total). To reset the total
fuel consumption to zero, press the “” (set)
and “” (mode) buttons at the same time.
EMU26770
Fuel economy
This gauge displays the distance per liter or
gallon when cruising, and is only for reference
use by the operator.
Press the “” (mode) button repeatedly
until the indicator on the face of the gauge
points to “” (economy).
ZMU01749
1. Selector switch
ZMU01751
U69J17E0.book Page 25 Tuesday, March 7, 2006 10:00 AM