Filter
Top Products
18
LCD Screen Options
Power Saving Mode
RoamEO is designed with a Power Saving Mode to improve the
battery life of the Receiver. When RoamEO enters the Power Saving
Mode, the brightness of the display is lowered to help save power. To
restore the screen to its original brightness, press any button and the
LCD will return to its original setting. RoamEO will display the message
Power Saving Mode on the LCD to notify you that when the system is
in this state. RoamEO will not initiate the Power Saving Mode for
approximately 45 minutes from start-up if the battery is in a fully
charged state.
RoamEO will not go into the Power Saving Mode if it is being used
while powered from the Power Adapter.
Changing Screen Views
Changing from screen to screen can be done at any time while the
GPS Receiver is on.
To change back and forth from the Basic Tracking Screen to the
Detailed Tracking Screen, press . No data is lost during this
transition.
To view the GPS Status screen, press the and
simultaneously.
RoamEO will continue to track your pets while this
screen is visible on the LCD
. Press and simultaneously
again to return to a tracking screen.
Adjusting the brightness on your LCD Screen
To increase or decrease the brightness of the LCD screen, press and
hold the and then use the Zoom button located on the side of
the Receiver to adjust the screen to the desired brightness.
Opt
ion
Opt
ion
Opt
ion