Filter
Top Products
TIC-LF414C
6
Unit : inch(mm)
(L2)
L1
8.86(225)
5.63
(
143)
1.42(36)
5.16(131)
Φ
D1
Note1: Eye bolts are provided at the top for flowmeters
sized 8"(200mm).
Note2: 1 inch = 25.4mm
ANSI class 150 and class 300 dimensions
Meter size
(inch)
L1
(inch)
L2
(inch)
D1
(inch)
Weight
(lbs)
1-1/2 3.94 10.39 3.35 approx. 13
2 4.33 11.02 4.02 approx. 15
3 4.33* 12.04 5.00 approx. 18
4 4.72* 13.30 6.26 approx. 22
6 9.06 16.02 8.50 approx. 49
8 11.81 18.03 10.51 approx. 70
BS16, DIN PN16 and JIS 10K dimensions
Meter size
(mm)
L1
(mm)
L2
(mm)
D1
(mm)
Weight
(kg)
40 100 264 85 approx. 6
50 110 280 102 approx. 7
80 110* 306 127 approx. 8
100 120* 338 159 approx. 10
150 230 407 216 approx. 22
200 300 458 267 approx. 32
*When Teflon PFA lining is selected, L1 in the table above
becomes as follows:
L1: 4.53 inch(115mm) for meter size 3"(80mm)
L1: 4.96 inch(126mm) for meter size 4"(100mm)
The dimension of L1 is changed when the material of
grounding ring is chosen Pt-Ir or Ta
Meter size L1
1/2”(15mm) 3.03 inch(77mm)
1”(25mm) 3.74 inch(95mm)
1 1/2”(40mm) 4.53 inch(115mm)
2”(50mm) 4.96 inch(126mm)
3”(80mm) 4.96 inch(126mm)
4”(100mm) 5.35 inch(136mm)
6”(150mm) 9.53 inch(242mm)
8”(200mm) 12.28 inch(312mm)
Figure 5. LF410/LF610 and LF414/LF610F flowmeters
Meter sizes 1 1/2"(40mm) to 8"(200mm)