Thales Navigation iCGRS GPS Receiver User Manual


 
74 SporTrak Color GPS Mapping Receiver
Appendix
Setting the Compass Orientation
As discussed in the previous section, there may come a time that you wish to turn the
compass off and use the GPS Course to determine your heading. (Remember, GPS
Course will only calculate heading when you are moving at a speed greater then 0.5 miles
per hour.)
1. From any screen press
MENU.
2. Use the arrow pad to highlight “Setup” and press
ENTER.
3. Use the arrow pad to highlight “Compass Orient.” and press
ENTER.
4. Use the arrow pad to select “GPS Course” and press
ENTER. (Selecting
“Magnetic North” turns the compass back on.
5. Press
ESC to exit the Setup Menu and return to the last screen you were
viewing.
Using the Barometer and Temperature Screens
In addition to the electronic compass, your SporTrak Color provides you with a “mini-
weather station” with temperature and barometer information.
Accessing the Weather Screen
1. From any screen press MENU.
2. Use the arrow pad to highlight “Weather” and press
ENTER.
The Weather Screen is displayed with current temperature and barometer information.
Temperature and barometric information are displayed in a familiar and easy to read
format. The bottom of the display is a graphic of the barometric readings taken over the
last 24 hours. (The SporTrak Color will take barometric readings anytime the compass is
active.)
A brief explanation of the barometer graph is in order at this time. A new bar indicating
your barometric pressure is added to the graph once every 15 minutes. If during the
course of an hour it has taken two readings, it fills in the gap between the readings. If,
however, you have turned the receiver off or do not have enough satellites to compute
altitude (four satellites are needed for altitude computations), and only one reading or less
has been taken in the course of the last hour, there will be gaps in the chart. (See Accessing
Barometer History for more information.)
Calibrating the Temperature and Barometer
This is not a requirement for using the temperature and barometer readings. It simply
makes the readings you have a little more accurate.