Filter
Top Products
Bluetooth GPS Receiver 8
© 2003 TeleType GPS
The PDA and Bluetooth GPS receiver are now paired!
5. Tap
OK
to exit the screen. Follow instructions from the next section to connect your PDA with your
Bluetooth GPS receiver.
1.3.2 Connection
To set up a connection between your host device (PC, PDA, etc.) and the TeleType Bluetooth GPS
Receiver, read the following instructions.
1.
Turn on the power to your host device and your Bluetooth GPS receiver.
Once the Bluetooth
receiver is turned on, the LEDs will appear as shown:
LED Indicator
Symbol
Activity
Blue
Flashing every one second
Green
Constant On
Red
No light (if fully charged)
2.
Activate Bluetooth on your host device. If the Bluetooth icon on the bottom right-hand corner of
the Today screen is gray, you will need activate Bluetooth. Tap on the icon, and a pop-up menu
will appear in the display. Select
Turn Bluetooth On
. The color of the Bluetooth icon will change
from gray to blue, signifying that it is turned on.