Filter
Top Products
TeleType GPS Manual11
© 2003 TeleType GPS
7.
You will be returned to the
Bluetooth Manager
screen. Double-tap
TeleType SPP Slave
to
connect to the Bluetooth GPS receiver. Once connected, if you double-tap the icon again, you will
see your connection status for the device. Signal strength is at the bottom of the screen. Try
experimenting with your Bluetooth GPS receiver to see how far it needs to be before the blue bar
reaches "Just right."
When the Bluetooth GPS is connected with PDA, the blue LED on the receiver will light up and
blink slowly. The green LED will be steadily on.