Filter
Top Products
Bluetooth GPS Receiver 16
© 2003 TeleType GPS
1.4 Troubleshooting
Q: My Bluetooth host device is asking me for a passkey. What is it?
A: It is "1234".
Q: I put the receiver in the charger yet it is not charging. How can I charge the receiver?
A: If the Bluetooth GPS receiver is sufficiently discharged, then placing it directly into the charger will
not be adequate to begin charging the unit. First, power the GPS receiver directly for 5 minutes.
Second, remove the power from the GPS receiver and apply power directly to the cradle. Insert the
GPS receiver into the cradle, and the unit should begin charging normally.
Q: The TeleType software doesn't seem to be making any connections with my Bluetooth GPS
receiver. How do I make it work?
A: You will need to make sure your PDA is paired with the Bluetooth device. Follow the instructions in
the Connection section to make sure that your PDA is recognizing the Bluetooth GPS receiver
properly. If so, you will need to connect with the device by going to the Bluetooth Manager and double-
tapping on the TeleType icon.
Q: I am experiencing difficulties connecting with my Bluetooth GPS and/or locking in to
satellites, what should I do?
A: Replace the rechargeable batteries with heavy-duty alkaline batteries.
Q:
My Bluetooth receiver seems to be connecting to satellites (the green light is blinking), but I
am unable to establish a connection between the receiver and my PDA. How can I make a
connection?
A: Go to the Bluetooth Manager on your PDA. Locate the "TeleType: SPP Slave" icon and tap and
hold. A pop-up menu will appear, select Delete.
Next, locate the Reset button on your Bluetooth GPS receiver and press it. Then perform a soft reset
on your PDA.
Once your PDA has finished resetting itself, go back to the Bluetooth Manager screen and perform the