Filter
Top Products
IMPREZA U.S.A. (E)
10
Maintenance and service
10-55
– CONTINUED –
J Front turn signal light
B Type A
HGA011BB
1. Remove the bolt securing the front turn signal light assembly.
2. Remove the front turn signal light assembly from the front bumper
and remove the bulb socket by turning it counterclockwise.
3. Remove the bulb from the socket by pushing it in and turning
clockwise, then install a new bulb.
4. Install the removed parts in the reverse order of removal.
B Type B
HG0194
1. Remove the front turn signal light assembly mounting screws using
the phillips screwdriver.
2. Remove the lens from the front turn signal light assembly.