Filter
Top Products
IMPREZA U.S.A. (E)
10-52
J Fog light (if equipped)
CAUTION
Halogen light bulbs become very hot while in use. If you touch
the bulb surface with bare hands or greasy gloves, finger prints
or grease on the bulb surface develop into hot spots, causing the
bulb to break. If there are finger prints or grease on the bulb sur-
face, wipe them away with a soft cloth moistened with alcohol.
B Type A
HGA002BA
HGA001BB
1. Remove the front fog light assembly by removing the three bolts.
2. Disconnect the connector.
3. Remove the front fog light case cap by turning it counterclockwise.
OM-H0412
Connector
Spring