Filter
Top Products
IMPREZA U.S.A. (E)
10-34
Washer Fluid Concentration Freezing Temperature
30%
50%
100%
10.4°F(–12°C)
–4 °F(–20°C)
–49°F(–45°C)
HG0122
Replacement of windshield wiper blades
Grease, wax, insects, or other material on the windshield or the wiper
blade results in jerky wiper operation and streaking on the glass. If you
cannot remove those streaks after operating the windshield washer or if
the wiper operation is jerky, clean the outer surface of the windshield (or
rear window) and the wiper blades using a sponge or soft cloth with a
neutral detergent or mild-abrasive cleaner. After cleaning, rinse the wind-
shield and wiper blades with clean water. The windshield is clean if
beads do not form when you rinse the windshield with water.
CAUTION
Do not clean the wiper blades with gasoline or a solvent, such as
paint thinner or benzene. This will cause deterioration of the
wiper blades.