Stanley Black & Decker CT06 Automobile Parts User Manual


 
CT06 User Manual ◄ 3
TABLE OF CONTENTS
SERVICING THE STANLEY HYDRAULIC CRIMPING TOOL. This manual contains safety, operation, and routine
maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine
maintenance, must be performed by an authorized and certied dealer. Please read the following warning.
For the nearest authorized and certied dealer, call Stanley Hydraulic Tools at the number listed on the back of this
manual and ask for a Customer Service Representative.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
IMPORTANT
To ll out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulic.com and select the Warranty tab.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SAFETY SYMBOLS ..................................................................................................................................................4
SAFETY PRECAUTIONS ..........................................................................................................................................5
TOOL STICKER & TAGS ..........................................................................................................................................6
HOSE TYPES ............................................................................................................................................................7
HOSE RECOMMENDATIONS ..................................................................................................................................8
FIGURE 1. TYPICAL HOSE CONNECTIONS .......................................................................................................8
HTMA REQUIREMENTS ...........................................................................................................................................9
OPERATION ............................................................................................................................................................10
FIGURE 2. OC/CC SETUP ..................................................................................................................................10
TOOL PROTECTION & CARE ................................................................................................................................14
TROUBLESHOOTING ............................................................................................................................................15
SPECIFICATIONS ...................................................................................................................................................16
CT06 PARTS ILLUSTRATION.................................................................................................................................17
CT06 PARTS LIST...................................................................................................................................................18