Filter
Top Products
28
Using the Supplied Software
You can install the software to your computer from the supplied disc. Using the software, you can
manage various data to use on the unit.
System requirements
Computer
• IBM PC/AT compatible machines
• CPU: Pentium III Processor 800 MHz or faster
• Hard Disc space: 300 MB or more (500 MB or more recommended)
• RAM: 128 MB or more (256 MB or more recommended)
•USB port
OS
• Microsoft Windows 2000 Professional with Service Pack 4 (or later)
• Microsoft Windows XP Home Edition/Professional with Service Pack 2 (or later)
• Microsoft Windows XP Media Center Edition/Media Center Edition 2004/Media Center Edition 2005
• Microsoft Windows Vista Home Basic/Home Premium/Business/Ultimate
Monitor
High color (16-bit color) or more, 1024 × 768 dots or more
Other
Internet connection for data download and support
Notes
• The following system environments are not supported.
– Non IBM PC type computers, such as NEC PC 98 series, Macintosh, etc.
– Homemade computers
– OS upgraded computers
– Multi-monitor environment
– Multi-boot environment
• Depending on the computer condition, operation may not be possible even with the recommended environment.
Installing the software
1 Turn on your computer and start Windows.
Log on using an account with administrator privileges.
2 Insert the supplied disc into your computer’s drive.
The Install Wizard appears.
3 Follow the on-screen instructions and complete the installation.
Connecting the unit to your computer
1 Turn on the unit and your computer.
2 Connect the unit to your computer with the USB cable.
The data communication between your computer and the unit starts.
Note
During communication, do not:
– disconnect the USB cable.
– turn off or reset the unit.
– shut down the computer, enter computer standby mode, or restart the computer.
Disconnecting
After the data communication is complete, exit the software, then disconnect the USB cable.