Filter
Top Products
47
and center key to enter a selection. The backspace
key (
§) on the keyboard erases letters. When you
are finished, press “RECORD” to save the name.
After you save the new course name, the “Select
Hole” screen immediately appears. The new course
name also automatically appears on your course list.
7.3.2 Map the Targets on the New Course
Mapping a new course with the Sonocaddie V350
Series is easy. Simply repeat the following steps
each time you want to add a target to a hole for a
new course.
Step 1: Press “SELECT” with the right soft key for
the hole you are mapping and then select “EDIT.”
Step 2: Stand at the target you want to add on the
hole. Use the 5-way key to scroll and highlight an
empty location on the Edit Screen where you want
to record the new target. You can record one target