Filter
Top Products
35
5.3 Measure your Shot Distance
The “Mark” feature provides a simple way to
quickly measure the length of any shot you make by
measuring the distance between the start and end
positions of the shot. It is available anytime, except
when you are on the Green Close-up screen. There
are two ways to access this feature. The quickest
way is to press “MARK” with the bottom button on
the front panel soft key of the Sonocaddie V350
Series, or select “MARK” from the “MAIN” screen.
Important: To use “Mark”, you must be on the
course and the Sonocaddie must have satellite
reception.
To measure your shot, stand near where you hit your
ball and press the “MARK” button and the Mark
screen below appears. Press “START” with the right
soft key and proceed to your ball. The distance
displays “0” and changes as you move. You do not
have to travel in a straight line to the ball since the
device always measures the distance from the
starting position to your current location in straight
line. When you reach the ball, press “END” to lock
the number and see the actual distance of the shot.
To measure another shot, press “START” again.
Press the left soft key or the Escape key to return to
the previous screen.