Filter
Top Products
43
6.3 Add a New Target to a Hole
To add a new target, follow the editing steps above,
except in Step 2 stand at the new target on the hole
and scroll to one of the three available locations in
an empty row. Then follow Steps 3 & 4 to select and
record a new target on the hole.
Tip: To make reading distances on Hole-Layout or
Hole-Info screens easier, be sure to record targets
on the Edit Screen in the same order they appear
on the hole. Also if you add a new target to a row
that already has one, the old target will disappear
from the screen and the new one will appear
instead.
6.4 Delete a Target on a Hole
If you don’t want a specific target that has been
recorded on a hole, deleting it is simple and you
don’t have to be on the course. From any hole on the
Sonocaddie V350 Series, select “MORE” with the
right soft key and “EDIT” to view the Edit Screen.
Scroll to and select the Target Icon you want to
delete. When the “Icon Screen” appears, select the
“Delete” icon and press the right soft key. The target
disappears from the hole.