Filter
Top Products
60
If this happens: Try this:
No audio when using the Aux In
Cable or Cassette Adapter
•Check all cables between your Satellite Radio
and your vehicle’s stereo system for a firm and
secure connection.
•Ensure you have selected the proper input
source on your vehicle’s stereo system.
•Ensure that the FM Transmitter in the Radio
is turned Off, and increase the audio level
of the Radio. Refer to the User Guide which
accompanied your Radio for instructions.
Audio sounds too soft •Raise the volume of your stereo system or
increase the audio level of your Satellite Radio
until the sound quality improves. Refer to the
User Guide which accompanied your Radio for
instructions.
Audio fades or has static when
listening
•Check all cables for a firm and secure connection.
•If you are using PowerConnect or the FMDA
to listen via your vehicle’s FM radio, and the
problem persists, it most likely is interference
from another commercial or broadcast FM
station. You will need to find an unused or
available FM channel in your area. Refer to step
5 on page 43.
•If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the
audio using the Aux In Cable or a Cassette
Adapter. (Refer to page 39 and page 41.) If you
cannot use those solutions, consider using an
FMDA. (Refer to page 45.)
Troubleshooting