Filter
Top Products
49
•If the chosen storage location has an FM preset that is not
currently being used, and you want to edit it, Edit Channel is
highlighted. Press Select. The FM channel tuning screen is
displayed where you can select an FM channel.
•If the chosen storage location has an FM preset that is not
currently being used, and you want to start using it, turn the
Control Wheel to highlight Start Using and press Select. Then skip
to step 8.
6 Turn the Control Wheel to tune the desired FM channel and press
Select to select the FM channel.
7 If you are editing the storage location that has the “current” FM
preset, skip to step 8. Otherwise, Start Using will be highlighted.
Press Select.
NOTE! You can also preset an FM channel in a storage location without
having to start using it right away. Just press menu and exit the screen.
8 The chosen FM channel will be confirmed on the display screen and
the XMp3i™ Radio will tune to that FM channel.
9 Set your vehicle’s FM radio to same FM channel.
IMPORTANT! You’ll first need to find a suitable FM channel that is unused
or available in your area. Refer to “How To Find Available FM Channels In
Your Area” on page 54.
To quickly select an FM channel from the preset list:
1 Press and hold Select. You will be prompted to set your vehicle
radio to the displayed FM channel.