Filter
Top Products
ST2C Starmate Replay User and Installation Guide
51
Program Time/Day
To program the time and day when the receiver
will tune to the specified channel, do the
following:
1.Use the channel up and down buttons to
highlight “Program Time/Day”, and press the
select button.
2.At the “Program Time/Day” screen, use the
channel up and down buttons to highlight
“Time”, and press the select button.
Program Time/Day
Time
DayDay
3.Use the channel up and down buttons to
change the minutes, and the category
previous and next buttons to change the
hours, to select the time you wish to tune to
the specified channel.
Program Time
12:00 PM12:00 PM
4.When you have selected the desired time,
press the select button to set the time and
exit.
5.At the “Program Time/Day” screen, use the
channel up and down buttons to highlight
“Day”, and press the select button.
6.Using the channel up and down buttons,
select the day of the week you wish to tune to
the selected channel, i.e., Monday, Tuesday,
etc., and press the select button.
Program Day
MondayMonday
To exit the Program Time/Day menu, press the MENU
button.
Channel Number
To set the channel to which the receiver will tune when
the Program Alert feature is On, do the following:
1.Use the channel up and down buttons to
highlight “Channel Number”, and press the
select button.
2.When the default display screen is displayed,