Filter
Top Products
ST2C Starmate Replay User and Installation Guide
43
Memory Options
Auto Memory Search
Clear All MemoryClear All Memory
Automatic Memory Search
To turn the automatic memory search On or Off,
do the following:
1. Use the channel up and down buttons to
highlight “Auto Memory Search”, and press
the select button.
2. Use the channel up and down buttons to
highlight either “On” or “Off”, and press the
select button.
Auto Memory Search
On
OffOff
To exit the Memory Options menu, press the
MENU button.
Clear All Memory
To clear all the S-Seek alerts stored in memory,
do the following:
1. Use the channel up and down buttons to
highlight “Clear All Memory”, and press the
select button.
2. At the confirmation screen, use the channel
up and down buttons to highlight “Yes”, and
press the select button.
Clear All Memory?
YesYes
No
The S-Seek memory is now erased.
To exit the Memory Options menu, press the
MENU button.
Auto Select
Auto Select chooses whether th
e Receiver
immediately tunes to a channel when a channel
is highlighted, or whether you must first press the
select button in order to tune to a highlighted
channel in any of the list modes. Turn Auto Select
On if you would like the Receiver to automatically