Filter
Top Products
ST2C Starmate Replay User and Installation Guide
21
Advanced Features
Channel Presets (BAND)
You can store up to 30 of your favorite channels as
presets for quick recall access. The preset channels
are stored in 3 bands, A, B, and C, each containing
10 channel presets, and are numbered 0 to 9. The
10 channel presets in each band are accessed by
pressing the appropriate number (0 to 9) on the
Receiver. A momentary press and release of the
BAND button cycles through the 3 preset bands (A,
B, and C).
Storing Channel Presets
To store a favorite channel as a preset, do the
following:
1. Momentarily press and release the BAND
button until the desired preset band, A, B, or C,
is displayed in the lower right corner of the
default display screen.
2. Tune the Receiver to the channel you wish to
store as a preset. (See the section, Basic
Operation for specific instructions for tuning to a
channel.)
3. Press and hold for 1½ seconds the numbered
through the available channels in each category
to find the channel to which you want to listen.
When you have found the channel you wish to
listen to, highlight the channel using the channel
up and down buttons and press the select button
to tune to the channel. The new channel will
begin playing and the display will revert to the
default display screen for the new channel.
To exit the channel list mode without changing to
a different channel, press and hold the DISP
button for 1½ seconds, until the default screen is
displayed.
Selecting Channels Directly
A channel may be directly selected by entering the
channel number using the 0 - 9 buttons on the
Receiver.
To enter a channel number, momentarily press and
release the select button. At the display prompt enter
the three digit channel number.
001
Category 12:00P A
Artist NArtist N
# ___
Enter Channel
Channel Name