Filter
Top Products
ST2C Starmate Replay User and Installation Guide
36
playing back the stored audio. You can use the
Fast-Forward button to skip ahead or exit the
Instant Replay mode, and begin listening to the
live broadcast again.
Should you press the Play/Pause button to stop
the playback, the play position indicator will stop
moving and continue to provide a visual indication
of your current position in the Instant Replay
memory.
When the Instant Replay memory is 10 seconds
from becoming full, two beeps will be heard (if the
Confirmation Tone option is enabled). When the
memory is full, the Receiver will automatically begin
playback, and will continue to store the channel
audio, overwriting the oldest portion of the audio
previously stored. When the memory is full, you will
be unable to rewind through the stored audio.
If you have partially played back the stored audio,
and have paused the Receiver again, the Play
Position indicator will begin to move left when the
Instant Replay memory becomes full, as it begins
overwriting the oldest portion of the audio previously
stored. When the Play Position indicator reaches
the left-most position, indicating that the memory
is full, the Receiver will automatically begin
playback.
Artist NameArtist Name
Song TitleSong Title
Play Position Indicator
Time Position of
Play Position Indicato
r
001 Ch. Name
-00:00:00
The Instant Replay Time Position provides the
exact amount of time the Play Position indicator is
behind the live broadcast, expressed as
Hours:Minutes:Seconds, and displayed as a
negative number. For example, if -02:40 is
displayed, this would indicate that the Play Position
indicator is 2 minutes and 40 seconds behind the
live broadcast.