Filter
Top Products
22
English
When more than 30 dives are made:
● If a new dive is made when log data of 30 dives are stored
in memory, the log data for the oldest dive is erased from
memory and the data for the new one is recorded in
memory.
● In that case, log No. for the existing data will be reduced by
one.
Dive that is not recorded in the dive log function
Even if the dive function is started by measuring a depth greater than
1.5 m (5 ft), a dive that lasts less than 3 minutes will not be recorded.
● How to erase the log data in memory
The entire log data stored in memory can be erased as
required.
Press to show DIVE LOG display.
A
Press to show LOG DATA ERASURE display.
B
B
A
▼
▼
▼
Press to return to DIVE LOG display.
B
C
and
D
Press and hold at the same time.
C
D
• Flashing quickly.
* “LoG-CLE” flashes quickly and then stops flashing after a
few seconds, indicating that the entire log data has been
erased from memory.
• No log data is
stored in
memory.
▼
• Remains displayed.
• Flashing “LoG-
CLE” appears.
HOW TO USE DIVE COMPUTER FUNCTIONS