Filter
Top Products
6 (Floor): This mode directs most of the air to
the floor outlets, with some of the air directed
to the windshield, side window outlets, and
second row floor outlets. In this mode, the system
automatically selects outside air. Recirculation
cannot be selected when in Floor Mode.
The right knob can also be used to select defog or
defrost mode. For more information, see
“Defogging and Defrosting” later in this section.
By positioning the right knob between two modes,
a combination of those two modes is selected.
@ (Recirculation): Press this button to turn the
recirculation mode on or off. The indicator light
on the button turns on when this mode is selected.
This mode keeps outside air from entering the
vehicle. It can be used to reduce the outside air
and odors entering the vehicle. Recirculation
may also help cool the air inside the vehicle more
quickly once the temperature inside the vehicle
is less than the outside temperature.
The recirculation mode can be turned off in vent
and bi-level modes by pressing the button
again. Recirculation mode automatically turns off
when the engine is turned off and must be
re-selected when the engine is turned on again.
The recirculation mode cannot be used with floor,
defrost, or defogging modes. If you try to select
recirculation in one of those modes, the indicator
flashes three times and turns off. The air
conditioning compressor also comes on when this
mode is activated unless the outside air
temperature is less than 40°F (4°C). While in
recirculation mode the windows may fog when the
weather is cold and damp. To clear the fog,
select either the defog or defrost mode and
increase the fan speed.
195