Filter
Top Products
Remote Control Buttons
O(Power): Press this button to turn the RSE screen
on and off (also powers up the DVD player if a disc
is loaded).
P (Illumination): Press this button to turn the remote
control backlight on. The backlight will time out after
about 7 to 10 seconds if no other button is pressed while
the backlight is on.
v (Title): Press this button to return the DVD to the
main menu of the DVD.
y (Main DVD Menu): Press this button to access
the DVD menu. The DVD menu is different on every
DVD. Use the up, down, left, and right arrow buttons to
move the cursor around the DVD menu. After making
a selection press the enter button. This button only
operates when using a DVD.
n, q, p, o(Menu Navigation Arrows): Use the
arrow buttons to navigate through a menu.
r (Enter): Press this button to select the choices
that are highlighted in any menu.
z (Display Menu): Press this button to adjust the
color, tint, brightness, contrast, and display mode
(normal, full, or zoom). The dynamic range compression
feature can be used to reduce loud audio and increase
low audio produced by some DVDs.
q(Return): Press this button to exit the current
active menu and return to the previous menu. This
button will operate only when a DVD is playing and a
menu is active.
e(Audio): Press this button to display a menu that
will only appear when a DVD is playing. The format and
content of this function will vary for each disc.
3-76