Sanyo TH4242 Automobile Accessories User Manual


 
99
99
9
SC
75
S4359146
(c) Automatic zone registration using the system
controller (SHA-KC64UG)
(1) Press the and
ZONE
buttons at the same
time for more than 4 seconds.
and CODE No. C1 will flash.
(2) Select CODE. No. C2 by pressing and
( ) button and press the button.
C2 changes from flashing to ON state and
automatic zone registration will start.
(3) Registered GROUP No. will be disappeared all.
(4) Central address will be assigned from small
indoor unit address to large one in numerical
order automatically.
Finishing automatic zone registration,
changes from flashing to OFF.
(5) If the error is happened, the “CHECK” starts
flashing and zone registration finishes at this
time. Press the button.
(6) Finally, complete automatic zone registration
mode by pressing the button.
flashes for a few minutes, then OFF.
2053_M_I
ZONE
ZONE
1
ZONE
SELECT
GROUP
9
2
3 4
6
Fig. 9-10